12
2. Compare
Scroll to select "2. Compare", then press "OK" to start the verification process.
3. Copy+Compare
Sequentially automates from Function 1, Copy to Function 2, then Compare.
Scroll to select "3. Copy+Compare", then press "OK" to start the automated duplication and
verification process.
4. Erase
There are 5 submenu modes.
Step 1: Connect device(s) for sanitizing.
Step 2: Enter function "4. Erase"
Scroll to select "4. Erase”, then press "OK" to view the 3 submenus.
4.1 Quick Erase
This function will erase the index table from the connected device(s).
Scroll to select "4.1 Quick Erase”, then press "OK" to start the erasing process.
4.2 Full Erase
This function will erase all data per NIST 800-88 Standards to the connected device(s).
Scroll to select "4.2 Full Erase”, then press "OK" to start the erasing process.
4.3 DoD Erase
This function will erase all data per DoD 5220.22-M Standards on the connected device(s).
Scroll to select "4.3 DoD Erase", then press "OK" to start the erasing process.
Note
The number of working/connected targets will be displayed on the LCD. Press
"OK" to start.
Caution
Please backup all important data before using this function.
Note
Source Port is disabled for erasing. Go to 6.6.2.2 to enable source port erasing.
