15
4.3 DoD Erase
This function will erase all data per DoD 5220.22-M Standards of the connected device(s).
Scroll to select “4.3 DoD Erase”, then press “OK” to start the erasing process.
4.4 DoD EraseComp
This function will erase all data per DoD 5220.22-M Standards, then verifies the erasure of
the connected device(s).
Scroll to select “4.4 DoD EraseComp”, then press “OK” to start the erasing and verification
process.
4.5 Secure Erase
This function erases the non-loadable areas complying with NIST 800-88 Standards.
Scroll to select “4.5 Secure Erase “, then press “OK” to start the erasing process.
5. Utility
This menu will reveal submenus related to device information, system information and
updates.
Scroll to select “5. Utility”, then press “OK” to view the submenus.
5.1 Show Device Info
This function will display basic information such as device model, name, capacity, etc…
Scroll to select “5.1 Show Device Info”, then press “OK” to view the connected device(s).
Then through to view connected device(s) by port number order.
5.2 Update System
Step 1: Prepare a USB drive for update.
Connect a USB drive to PC. Download the latest firmware provided from U-Reach technical
support, unzip the BIOS firmware, and save it to the root directory in the USB drive.
Step 2: Proceed to update firmware
Connect USB drive to the USB port in front of the duplicator. Scroll to select “5.2.1 Update
BIOS”, then press “OK” to start the firmware update process.
Note
The USB’s format must be: FAT16 or FAT32.
