13
1.2 Internal Storage
(Available when internal SSD is installed)
Scroll to select “1.
2 Internal Storage”, then press “OK” to select which GOB Image to copy
from the duplicator’s built-in storage device. The GOB Image is created through U-Reach’s
proprietary software that is included with the duplicator.
2. Compare
Scroll to select “2. Compare”, then press “OK” to select which source to verify from. Scroll to
select “2.1 Source Port” or select “2.2 Internal Storage “, then press “OK” to start the
verification process.
2.1 Source Port
Scroll to select “2.
1 Source Port “, then press “OK” to verify targets from the source port.
2.2 Internal Storage
(Available when internal SSD is installed)
Scroll to select “2.
2 Internal Storage “ , then press “OK” to select which GOB Image to verify
from the duplicator’s built-in storage device. The GOB Image is created through U-Reach’s
proprietary software that is included with the duplicator.
3. Copy+Compare
Sequentially automates from Function 1, Copy to Function 2, then Compare.
Scroll to select “3. Copy+Compare”, then press “OK” to select which source to copy and
verify from. Scroll to select “3.1 Source Port” or select “3.2 Internal Storage “, then press
“OK” to start the automated duplication and verification process.
Caution
1. When “1.2 Internal Storage” is selected, the 1
st
port becomes a target port
automatically (e.g. NV-BM60 will become 1-6 duplicator). Please use the
duplicator carefully as the manufacturer will not held responsible for any data
loss.
2. The GOB Image (internal storage) will not copy to smaller target capacities.
Note
The number of working/connected targets will be displayed on the LCD. Press
“OK” to start.
