12
Functions
1.Copy
Step 1: Prepare source and target devices.
Step 2: Connect source and target devices.
Step 3: Proceed to copy.
Scroll to select “1. Copy”, then press “OK” to select which source to copy from. Scroll to
select “1.1 Source Port” or select “1.2 Internal Storage”, then press “OK” to start the
duplication process.
The following information below states what is displayed on the LCD during duplication.
Step 4: Copy Completed!
The quantity of passed or failed target device(s) and the copied duration will be displayed
on the LCD after duplication completes.
1.1 Source Port
Scroll to select “1.
1 Source Port”, then press “OK” to copy to targets from the source port.
Note
Recommendation: Target device(s)’ capacity must be equal to or larger than
the source device capacity.
Note
The number of working/connected targets will be displayed on LCD. Press
“OK” to start.
Note
Press
▲▼
together for 5 seconds to stop operation on the slowest device.
Copy 40.0G
3ready
Copy x3 40G
1:38 25% (4) 10.3G
Function
Total Data
Copied
Time & %
Slowest
Port
Copied
Data