9
Total Control
HDA-1600-70V
Owner’s Manual
Connecting Speakers
The
HDA-1600-70V Multi-Zone Amplifier
can be placed nearly anywhere and deliver
power to a local zone.
To connect speaker wire:
1. Connect the
speaker wire
to the positive (red) and negative (black) to the wire
terminals available on the speaker (be mindful of proper polarity).
Please refer to the manufacture’s owner’s manual for specific instructions on
wiring the speaker.
2. Loosen the integrated slotted-style screws (turn counter-clockwise) and
remove
the phoenix connector from the terminal block on the HDA-1600-70V
.
3. Secure the
speaker wire into the phoenix connector
(using the integrated
slotted-styled screws), and reinsert it into the terminal block.
4. Using the integrated slotted-styled screws on the
left and right sides of the phoenix connector
(image at the right),
secure the phoenix
connector to the terminal block
.
CAUTION!
Verify the polarity
of the
speakers and the wires before
returning the phoenix connector into
the terminal block on the amplifier.
6.5” SP-6EX
HDA-1600-70V
