TABITHA DESK
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 3
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screwdriver
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth. Do not use harsh chemicals. Before
cleaning any part test a small spot in a hidden area. You may need to re-tighten all
bolts after initial use.
PARTS INCLUDED
(C) Hex key
1x
(D) Bolt
[1/4” x 7/8”] x12
(E) Spring washer
[1/4"] x12
(F) Flat washer
[1/4"] x12
TIP KIT
(G) Nylon strip
(H) Bracket
x2
(I) Screw
[M3 x 32mm] x2
(J) Screw
[M3 x 19mm] x2
