9
3 Installation
3.3 Cable Connection
3.3.1 Connecting Input and Output Cables
1. Input cable connection
If the UPS is connected via the power cable, please use a proper socket with
over current protection, and pay attention to the capacity of the socket: over
10A for 1K(S/L), over 16A for 2K(S/L) and 3K(S/L). A side of input wiring
has been fixed with the UPS, and the other side is just need to plug into the
input socket. The wiring configuration is shown in the following diagram.
Figure 3-1 Connection Method of Input
2. Output cable connection
The output of 1K(S/L)/ 2K(S/L)/ 3K(S/L) all available to uses sockets. The
total output power shall not exceed 1kVA/0.8kW, 2kVA/1.6 kW
，
3kVA/2.4
kW. Simply plug the load power cable to the output sockets of UPS to
complete connection as shown in the following diagram.
