UPS ZINTO A 1000, User Manual

Page: 78 / 181

LED Significance
General
Optical indication of a general
malfunction, e.g. overtemperature,
short circuit, etc.
Battery
Optical indication of a faulty bat-
tery or a discharged battery.
Overload
Optical indication that the overload
time limit has been exceeded.
Output
220V / 230V / 240V
Optical indication of the output
voltage. Can be changed using the
UPS menu or in software.
Input
Normal / Generator /
Wide Range
Optical indication of the input sen-
sitivity. Can be changed using the
UPS menu or in software.
Table 2: Indicators
its varies.
put connector, plug (male).
Input and / or output fuse protection.
kets: 10A sockets as w
s on 3kVA control unit.
external
1.5kVA).
protectio
ket (male
lso via D
for emergency power off (from 1.5kVA).
Slot for optional interface cards (from 1.5kVA), e.g.
SNMP / network management card basic, SNMP / network
6.2.1.3 Rear of device:
The rear of the control un
They have:
•
An in
•
•
Output soc
16A socket
ell as
•
Socket for connecting an batterypack (from
•
RJ45 socket for data line n.
•
USB socket and DB9 soc
cation. Floating contacts a
) for RS-232 communi-
B9 socket.
•
Terminal block
•
management card professional.
78 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley