UPS ZINTO A 1000, User Manual

Page: 77 / 181

Controls:
Button Function
Button for switching on and off the UPS.
Keep button pressed for 3 sec.
TEST
This button has 2 functions:
3.) Manual starting of the system test.
4.) Deactivation / reactivation of the
acoustic alarm.
Set I/O
Button for starting configuration. Configura-
tion refers to the programming of the input
sensitivity and output voltage.
Button for accepting the configuration.
Table 1: Controls
he significance of the indicators is explained in the following
table:
Indicators:
T
LED Significance
Line
Optical indication of the normal
mode , i.e. mains voltage within
tolerance.
Battery
Optical indication of the battery
mode , i.e. mains voltage out of
tolerance and UPS in the battery
mode.
and scale indication
Optical indication of the utilisation
in %.
and scale indication
Optical indication of the remaining
battery capacity / power backup
time in %. Only active in the
bat-
tery mode .
Inverter
Optical indication of a malfunction
in the inverter.
77 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30/09/2009, Dipl.-Ing. S. Spitzley