UPS Aviation Technologies Apollo User Manual Download Page 54

Page: 54 / 82

Standby

Causes the transmit function of ADS-B to enter the

standby mode. Other aircraft can be seen, but no data is

transmitted. This mode is similar to setting a standard

transponder to the ‘standby’ mode.

Flight ID Editing

The Enter Flight ID option allows you to edit your

broadcasted Flight ID. The Function “smart” keys at the

bottom of the screen change to arrow keys. Use the

UP/DOWN

arrow keys to change the characters. Use the

LEFT/RIGHT

arrow keys to move between characters. Press

the

MENU/ENTER

key to save the displayed Flight ID. The

Flight ID is only sent when the Flight ID broadcast

option is enabled.

Traffic Altitude Filter

For ADS-B equipped installs, an altitude filter allows

targets that are outside of a +/-2000’ vertical range to be

filtered off the display.

This option is controlled via the Traffic Function Menu

and causes the on-screen mode to change from ‘ALL’ to

‘+/-2000’ in the upper left of the Traffic Function screen.

In the ‘ALL’ mode, all targets, regardless of their altitude,

are shown. In +/-2000’ mode, only targets that are within

2000’ above or below the ownship altitude are shown.

Detailed Operation

Summary of Contents for Apollo



















































































Search results

Summary of Contents for Apollo

Reviews:

UPS Aviation Technologies Apollo, User Manual, Page: 54 / 82

Search results

Summary of Contents for Apollo

Reviews: