UPS Aviation Technologies Apollo User Manual Download Page 44

Page: 44 / 82

Label

The

LABEL

key turns the labels for each item on or off for

easy decluttering. When Labels are turned off, only the

identifier for waypoints along the flight plan will remain

in view when the flight plan is enabled.

IFR Option Page 2

The second option page of the IFR Chart function lets

you select options for the choices of Low Airways, and

High Airways. The last option selection takes you back to

the first page of options.

Low Airways

The Low Airways option allows you to control the display

of Low Airways. Pressing the

LINE SELECT

key next to

Low Airways toggles between either the display of the

airway and label, airway alone, or no display of Low

Airways.

High Airways

The High Airways option allows you to control the

display of High Airways. Pressing the

LINE SELECT

key

next to High Airways toggles between either the display of

the airway and label, airway alone, or no display of High

Airways.

Detailed Operation

Summary of Contents for Apollo



















































































Search results

Summary of Contents for Apollo

Reviews:

UPS Aviation Technologies Apollo, User Manual, Page: 44 / 82

Search results

Summary of Contents for Apollo

Reviews: