Basic Operation
Use the following items to get a basic feel for the operation
of the MX20. The basic steps for using any of the separate
functions of the MX20 are:
Turn the power on.
Adjust the brightness or set it to automatic.
Check that all tests pass on the Start Up screen.
Press the
FN
key to view available functions. Each
press of the
FN
key will step through the lists of
functions.
Press the key below the function label to select the
desired function.
Confirm or enter the current barometric pressure
Press the
MENU/ENTER
key to display available
options.
Press the
LINE SELECT
key next to the displayed
option to choose desired capabilities. Some options
use multiple key presses for different states for the
option. Press the
MENU/ENTER
key again to
extinguish the option display.
Refer to the Detailed Operation section for more
details on each function.
Power On
Turn the power rotary knob clockwise past the detent to
turn the power on. The MX20 will progress through a
series of startup screens. The final startup screen shows
System Information and the results of the Self-Test.
Pre-Heat Mode
The MX20 will go into a pre-heat mode for a short period
of time on start-up. During the pre-heat mode, the display
will remain dark. The pre-heat mode is designed to
extend the life of the LCD backlight.
9
Getting Started