UPS Aviation Technologies Apollo Page 74 User Manual Download

Page: 74 / 82

Caring For Your MX20

Display Care and Cleaning

Your MX20 has a durable display, but reasonable care

must be taken to maintain its performance and life. To

remove stains, smudges, fingerprints, and so forth, we

recommend these cleaning methods. If the first method

fails to remove the problem, try the next method.

Wipe with a clean, dry, non-abrasive fabric (for

example, cotton or handi-wipes). Do NOT use paper

products, such as paper towels or facial tissues.
Blow on the area to condense moisture on the display

and then wipe the area with the clean fabric.
Moisten a clean fabric with a small amount of water

and wipe the display area.
Apply a small amount of glass cleaner (without

ammonia) to the fabric and wipe the area.
Apply a small amount of isopropyl alcohol and wipe

the area (this is your last resort).

Contacting the Factory

The UPS Aviation Technologies factory may be called

weekdays from 8:00 am until 5:00 pm Pacific time. The

technical service staff will gladly assist you.

UPS Aviation Technologies

Technical Service Department

2345 Turner Rd., SE

Salem, OR 97302 USA

USA Toll Free 800.525.6726

Canada Toll Free 800.654.3415

FAX 503.364.2138

International 503.391.3411

Detailed Operation

Summary of Contents for Apollo



















































































Search results

Summary of Contents for Apollo

Reviews:

Related manuals for Apollo

Brands by name

Popular brands

UPS Aviation Technologies Apollo, User Manual

Search results

Summary of Contents for Apollo

Reviews:

Related manuals for Apollo

Brands by name

Popular brands