UPS Aviation Technologies Apollo Page 15 User Manual Download

Page: 15 / 82

Data Card

The Map database and other information is stored on a

data card. The use of a data card allows you to easily

update information.

Only change the data card when the power is turned

off.

Handle your data card carefully. Do not touch the

connector edge of the data card. To eject the card, use a

soft blunt object to press the data card ejector. Gently pull

the card straight out of the slot. Insert a data card by

pushing the card straight into the slot. When fully

inserted, the data card and eject button will be flush and

slightly recessed into the bezel.

When contacting your dealer or the UPS Aviation

Technologies technical services staff, eject the data card

and write down the information shown on the label.

Getting Started

Data Card Ejector

Data Card

Front

Side View of Data Card

Front View of Data Card Slot

UPS Aviation Technologies

APOLLO Mx20

P/N 138-0448-010

TSO C113, TSO C110A

DO-178B

LEVELS C,D

DATE

S/W VERSION

Nav Data: Copyright Jeppesen Sanderson, Inc.

2000 UPS Aviation Technologies Inc.

Date of Jeppesen Nav data

Version of Mx20 software

Summary of Contents for Apollo



















































































Search results

Summary of Contents for Apollo

Reviews:

Related manuals for Apollo

Brands by name

Popular brands

UPS Aviation Technologies Apollo, User Manual

Search results

Summary of Contents for Apollo

Reviews:

Related manuals for Apollo

Brands by name

Popular brands