manualshive.com logo in svg

UPS Aviation Technologies Apollo, User Manual, Page: 10 / 82

Share
Download
UPS Aviation Technologies Apollo User Manual Download Page 10

Navigating the Displayed Data. . . . . . . . . . . . . . 53
Smart Key Function. . . . . . . . . . . . . . . . . . . . 53
Sorting FIS Messages . . . . . . . . . . . . . . . . . . . 54

Lightning Strikes (LT) Function . . . . . . . . . . . . . . . 55

Flight Plan . . . . . . . . . . . . . . . . . . . . . . . . . 56
360/120 . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Lightning. . . . . . . . . . . . . . . . . . . . . . . . . . 56

Strike. . . . . . . . . . . . . . . . . . . . . . . . . . 56
Cell. . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Heading Stabilization . . . . . . . . . . . . . . . . . . . 56
System Data . . . . . . . . . . . . . . . . . . . . . . . . 56
Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Noise Monitor . . . . . . . . . . . . . . . . . . . . . . . 57
Strike Test . . . . . . . . . . . . . . . . . . . . . . . . . 58

System Function . . . . . . . . . . . . . . . . . . . . . . . . 59

System Nav Page . . . . . . . . . . . . . . . . . . . . . 59

Ownship Symbol . . . . . . . . . . . . . . . . . . . 59
Lat/Lon Format. . . . . . . . . . . . . . . . . . . . 59
Set Baro Units. . . . . . . . . . . . . . . . . . . . . 59
Set Baro Correction. . . . . . . . . . . . . . . . . . 60
Display Lat/Lon Lines . . . . . . . . . . . . . . . . 60

System Info. . . . . . . . . . . . . . . . . . . . . . . . . 61

GPS and datalink status . . . . . . . . . . . . . . . 61

System Test Page . . . . . . . . . . . . . . . . . . . . . 62

Test Pattern 1 . . . . . . . . . . . . . . . . . . . . . 63
Red, Green, Blue, White Test Pattern. . . . . . . . 63

Caring For Your MX20 . . . . . . . . . . . . . . . . . . . . 64

Display Care and Cleaning . . . . . . . . . . . . . . . . 64

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 65

viii

Summary of Contents for Apollo



















































































Reviews:

No comments