Schematics
Section
LX 31/41 Work Platform
6-3
Figure 6-1: Electrical Schematic, Two Wheel Drive, Gasoline / Propane Model (Serial Number 1000-1330)
6.1
REFERENCE
DESIGNATION
NAME
FUNCTION
LOCATION
S19
Throttle Switch
Supplies power to throttle
Lower control box, in
relay.
panel, top, first from
right.
S20
Choke Switch
Supplies power to choke
Lower control box, in
relay.
panel, second from top,
first from right.
SEN1
Level Sensor
Provides power to cutout
Control module.
relay when machine is
level.
SOL1
Throtttle Solenoid
Controls engine throttle.
Power module, engine,
right side.
SOL2
Run Solenoid
Controls fuel valve.
Power module, engine,
on injection pump.
SOL3
Gas Solenoid
Controls Fuel Valve.
Power module, inline
with gasoline supply.
SOL4
Propane Shut-Off
Controls propane valve.
Power module, inline
Solenoid
propane supply.
SOL5
Proportional Solenoid
Controls proportional
Right side of manifold,
valve.
port marked 'G'.
SOL6
Forward Solenoid
Controls forward valve.
Right side of valve
manifold, port marked 'K'.
SOL7
Reverse Solenoid
Controls reverse valve.
Right side of manifold,
port marked 'L'.
SOL8
Lift Solenoid.
Controls lift valve.
Right side of manifold,
port marked 'J'.
SOL10
Series / Parallel Solenoid
Controls series / parallel
Front side of manifold,
(two)
valves.
ports marked 'Q' & 'R'.
SOL12
Down Solenoid
Controls down valve.
Lift cylinder, lower end.
SOL13
Steer Right Solenoid
Controls steer valve when
Top of manifold, on
steering right.
steer valve.
SOL14
Steer Left Solenoid
Controls steer valve when
Top of manifold, on
steering left.
steer valve.
SOL15
Throttle Solenoid
Controls engine throttle.
Power module, engine,
right side.
SOL16
Choke Solenoid
Controls engine choke.
Power module, engine,
right side.
Table 6-1: (cont.)
Note: See figure 6-17 for relay, terminal strip locations.
Summary of Contents for LX31
