Uponor Smatrix Base PRO X-147, Installation Manual

Page: 21 / 30

Uponor Smatrix Base PRO Controller X-147 Modbus RTU interface l Installation manual l 21
3.4 Discrete Input data points
These datapoints are read only and show the actuator, pump/boiler, and GPI status on the controller (binary, on/off).
Display name Register
address
(decimal)
Function code
(Hex)
Type Analogue/
Binary
Coding
Actuator status/channel 1 (bit 0) 10001 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 2 (bit 1) 10002 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 3 (bit 2) 10003 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 4 (bit 3) 10004 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 5 (bit 4) 10005 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 6 (bit 5) 10006 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 7 (bit 6) 10007 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 8 (bit 7) 10008 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 9 (bit 8) 10009 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 10 (bit 9) 10010 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 11 (bit 10) 10011 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Actuator status/channel 12 (bit 11) 10012 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
Pump/Boiler (bit 12) 10013 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
GPI status (bit 13) 10014 0x02 Read Binary Unsigned. 1 = ON, 0 = Off.
10015
10016