UPnRIDE Powered Wheelchair User Guide
Page 45 of 90
Document Version: UM-01-01_Rev B5
6.3.
R-net Control Panel with LCD Display
Figure 6-2: R-net Control Panel
Table 6-1: R-net Control Panel Legend
Component
Description
1
Power
Warning
Do NOT use the power button to stop the wheelchair, except in an
emergency. Using the power button to stop will cause the wheelchair to
stop abruptly and may cause personal injury. It can also shorten the life of
the wheelchair drive components.
The Power button turns of the wheelchair.
2
LCD display
This LCD display shows status information. Under normal circumstances it
displays the following:
Battery gauge
Speed
Current profile
Under certain conditions other information is displayed. Refer to chapter 7: R-
net Control Panel Guide for details.
3
Profile
Selection of indoor or outdoor speed level.
4
Right turn signal This button activates the right turn signal light.
5
Speed Increase
This button increases the maximum speed setting.
6
Speed Decrease This button decreases the maximum speed setting.
7
Left turn signal
This button activates the left turn signal light.