© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
1
Package Contents
Enfield Single Monitor Arm
SKU: MON041
Package Contents
Allen Wrenches
(set of two: 4mm, 6mm)
Lower Arm
Wire Cover
Upper Arm
Lower Clamp
VESA Plate
Upper Clamp
M5x12 Screw (M-B)
(qty 4)
M5 Washer (M-C)
(qty 4)
M4x12 Screw (M-A)
(qty 4)
M6x12 Flathead Screw
(qty 3)
Flat Wrench
Base
Lower arm
Upper arm
Vesa mount (x1)
Lower base plate
Upper base plate
Bar
Handle
Adhesive Pad
Wire Cover
Upper Clamp
Lower Clamp
Base screw (x4)
3mm Allen wrench
L
4mm Allen wrench
M
6mm Allen wrench
N
D5 Washers (x4)
M5x12 bolt (x4)
M4x12 bolt (x4)
O Bolt (x4)
N Bolt (x4)
Base
Lower arm
Upper arm
Vesa mount (x1)
Lower base plate
Upper base plate
Bar
Handle
Adhesive Pad
Wire Cover
Upper Clamp
Lower Clamp
Base screw (x4)
3mm Allen wrench
L
4mm Allen wrench
M
6mm Allen wrench
N
D5 Washers (x4)
M5x12 bolt (x4)
M4x12 bolt (x4)
O Bolt (x4)
N Bolt (x4)
Base
Lower arm
Upper arm
Vesa mount (x1)
Lower base plate
Upper base plate
Bar
Handle
Adhesive Pad
Wire Cover
Upper Clamp
Lower Clamp
Base screw (x4)
3mm Allen wrench
L
4mm Allen wrench
M
6mm Allen wrench
N
D5 Washers (x4)
M5x12 bolt (x4)
M4x12 bolt (x4)
O Bolt (x4)
N Bolt (x4)
Base
Lower arm
Upper arm
Vesa mount (x1)
Lower base plate
Upper base plate
Bar
Handle
Adhesive Pad
Wire Cover
Upper Clamp
Lower Clamp
Base screw (x4)
3mm Allen wrench
L
4mm Allen wrench
M
6mm Allen wrench
N
D5 Washers (x4)
M5x12 bolt (x4)
M4x12 bolt (x4)
O Bolt (x4)
N Bolt (x4)
Base
Clamp Method
Bolt-Through Method
• Acceptable monitor weight range: 4.4 lb to 19.8 lb
• Desktop thickness compatibility:
• Clamp Method: 0.4”-3.3” thick.
• Bolt-through Method: 0.4”-3.1” thick
There are two ways to attach the Enfield Single Monitor Arm to your desktop. If you would like to attach it along the back
edge of your desktop, follow the Clamp Method instructions starting on this page. If you prefer to attach it through your
desktop, follow the Bolt-Through Method instructions starting on page 2.
Step 1
Determine your mounting method. There are two
ways to attach the Enfield Single Monitor Arm to your
desktop:
Clamp Method:
If you would like to attach the monitor
arm along the back edge of your desktop, follow the
Clamp Method instructions (Steps 2 - 4).
Bolt-Through Method:
If you prefer to attach the
monitor arm through your desktop, skip Steps 2 - 4
and follow the Bolt-Through Method instructions
(Steps 5 - 7).
Step 2 (Clamp Method)
Align the Upper Clamp with the Base in the orienta-
tion shown and attach it using the three M6x12 Flat-
head Screws and the 4mm Allen Wrench.
Clamp Method
Parts for
Bolt-through assembly
Upper Base Plate
Lower Base Plate
Long Bolt
M8 Washer
M8 Nut
