ASSEMBLY INSTRUCTIONS
Revised 01/30/15
Page 1 of 2
PARTS LIST
PARTS BAG
UPC 2011 5.5” up to 48” Wide 3-Tier PETG Card Rack
TOOLS REQUIRED: Flathead Screwdriver (Slatwall)
Drill with 3/8” Drywall Bit & Phillips Screwdriver (Drywall)
C
A
E
C
G
C
C
C
PART
Quantity
Reference
Screw Posts
2-3
A
Slatwall Adapters
2-3
B
Nuts
2-3
C
Plastic Wall Togglers 2-3
D
Phillips Head Screws 2-3
E
D
PART Quantity Reference
Divider
1-8
F
Rack
1
G
F
B
C
B
A
B
Slatwall Assembly
Insert Divider(s) (F) into
Rack (G).
NOTE: Assemble for EITHER Slatwall or Drywall, not both.
NOTE: Quantities of parts vary with width of
Rack chosen.
5.5” up to 48”
(wide)
1
2
G
Align hole in Slatwall Adapter (B) with back side of hole in Rack (G). Prongs extend back
toward Slatwall and up. Attach using Screw Post (A) from front and Nut (C) on back.
A
OR
B
A
B
A
B
A
G
F
