Quick Start Guide
UP Connect Plus
www.up-board.org /www.up-shop.org / www.up-community.org
Carrier board expansion specifically design the UP Core Plus board.
Enable 3x GbLAN for your UP Core Plus.
Supports 5G Module (M.2 3042/3052 colay) with micro-SIM card port
What’s in your kit?
What fits with your kit?
* Please refer the setup guide for UP Core Plus for setting up your UP Core plus board.
** UP Connect Plus is also compatible with UP Xtreme. When paired with UP Xtreme, USB 3.0 on Connect Plus becomes unavailable for use.
Replace 2 short stand-offs on your UP Core Plus with 2 long stand offs in the kit.
Connect your Connect Plus on top of the adapter boards attached to the UP Core Plus, and screw the rest 6 shorter stand-offs on the top of Connect Plus.
Your UP Connect Plus attached to the UP Core Plus should look like this.
UP Connect Plus x1
Adapter Board i x 1
(Short)
Adapter Board ii x 1
(Long)
x2 Standoff (Long)
4x short standoff
ii x1 long
adapter board
6x short standoff
i x1 short
adapter board
replace 2x short standoff
with 2x long standoff
2x long standoff
UP Core Plus x1*
x10 Standoff (Short)
1
2
3
>
>>
>>
>>
connect
connect
connect
screw
screw
screw
screw
What’s next?
connect
Connect two adapter boards to the board-to-board connectors
on UP Core Plus and screw 4 short stand-offs on the top.
• UP Connect Plus is a plug-and-play expansion for UP Core Plus**
• UP Connect Plus comes with three Gigabit Ethernet ports, an M.2 3042/3052
slot for 4G/5G modems and a USB 3.0 port, ready for use.
• There is also a micro-SIM slot to use if a M.2 4G/5G modem is installed.
• The user can then connect to the internet via Ethernet or, if a modem is
installed, via 4G/5G by configuring the network accordingly (OS specific).
