19
(2)
Set whether to mute the audio. If no, set the play volume.
(3)
Click
Save
to complete the audio configuration.
3.4.5
Personalization
The device supports Screensaver Mode (pictures only). The configuration is as follows:
(1)
Choose
Setup
>
System
>
Personalization
and click the
Screensaver Mode
tab.
(2)
Set the screensaver mode by referring to the table below.
Parameter
Description and Configuration
Screensaver Mode
On
Off
Select whether to enable the screensaver mode based on actual conditions.
Image Play Internal(s)
Set the interval for playing screensaver images.
The value is an integer in the range of 3s to 3600s. The default value is 10s.
Standby Time(s)
When the duration in which the device does not detect any personnel to measure temperature
or operate reaches the time set here, the devicel enters the screensaver mode.
The value is an integer in the range of 3s to 3600s. The default value is 10s.
The device exits the screensaver mode when someone measures the temperature or taps the
screen.
Import Image File
Users can define ad images. The requirements for ad images are as follows:
The file to be imported must be a .zip file. The file can contain three .jpg pictures at most,
which are named 1.jpg, 2.jpg, and 3.jpg, respectively.
Image requirements: The image must be in jpg format, and the recommended resolution is
600x1024.
(3)
Click
Save
to complete the screensaver mode configuration.
