13
Common user: referred to as “user” in this manual. User only has permission to play live and recorded video.
Up to 32common users are allowed in the system.
You can add a user on the user management interface (under
Setup
>
Security
>
User
).
After the user is added successfully, you can change the password by entering the new password or delete the
user by clearing the username.
NOTE!
Only admin can change passwords. Changing the username or password for a user when the user is still logged in
will force the user to log out. The user must use the new username or password to log in.
Only admin can add and delete users. Deleting a user when the user is still logged in will force the user to log out.
A deleted user cannot log in.
This function of playing live and recorded video is not supported by some models. So it doesn’t make sense to
add common users. Please see the actual model for details.
3.3.2
Network Security
After security information transmission is set, you can
establish an
information security
channel to ensure data
transmission security.
1. HTTPS
(1)
Click
Setup
>
Security
>
Network Security
>
HTTPS
.
(2)
Select
On
for
HTTPS
. You may import a custom SSL certificate as needed.
(3)
Click
Save
.
Next time you log in, enter the address in https://IP:HTTPS port number format, for example,
https://192.168.1.13:443 to enter secure channel mode. If you use the default HTTPS port, enter https://IP.
2. RTSP Authentication
The configuration is not supported.
3. ARP Protection
This function protects a device from ARP attacks. The gateway and the MAC address must be set properly before
a PC can access the device from another network; if an incorrect MAC is set, only PCs on the same LAN can access.
(1)
Click
Setup
>
Security
>
Network Security
>
ARP Protection
.
(2)
Select the check box to enable the ARP binding function and set the gateway MAC address.
(3)
Click
Save
.
4. IP Address Filtering
Use IP address filtering to allow or forbid access from specified IP address(es).
(1)
Click
Setup
>
Security
>
Network Security
>
IP Address Filtering
.
