background image

                                                                                                                                               

/

/

/

5

5

5

²

²

²

/

/

/

5

5

5

  

10 

Operating manual

 

RS100-4-S

 

BA-AB-4485-RS100-Englisch.doc

 

Erstelldatum 30.05.2011 14:57:00

 

10 

Danger:  

Do not mount on the shredder / screw conveyor / conveyor belt! 
 

Note:  

Read the operating instructions (including Annex) carefully 
before start-up of the equipment. It is important that all details of 
the instructions are well understood as they cover important 
information about safe and proper handling and trouble-free 
operation of the shredder. 

Note:  

People standing near the shredder must wear safety helmet, 
safety goggles, hearing protection and breathing masks! 

Danger:  

 

Putting the fingers through the exit screen is strictly forbidden! 

Danger:  

Looking and reaching into the hopper during operation is strictly 
forbidden! 

Warning: 

Warning - harmful or irritating substances.

 

This machine is not designed for shredding flammable or toxic 
materials. 

3.3 Symbols on the machine 

The following warnings and information are to be found on the machine: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for RS100-4-S

























































Reviews: