Unisight Digital Technologies
(Fig. 2-22)
Environment: The Enable Client Connection check box needs to be checked to allow remote
client users to connect to the server. A log is created for every day that the Unisight DVR
Server is running. To change the number of days that these logs are stored type in the
desired number into the Log Info Keeping Period field. To have the Unisight DVR Server
automatically restart check the Auto Restart check box. To specify when this restart will
happen select the desired day, hour, and minute using the corresponding drop down boxes. It
is recommended to restart at least once a week. To shutdown automatically check the Auto
Shutdown check box and configure the day, hour, and minute drop down boxes. Auto
Shutdown will only exit the Unisight DVR Server application which will stop all recording. To
have the entire DVR system turn off check the Power Off When Shutdown check box. The
server application can be scheduled to automatically start at a specific time. To enable this
feature check the Auto Start check box and select the desired hour and minute using the drop
down boxes. This feature requires a Watchdog unit to be spliced into the PSU. If no
Watchdog unit is installed/configured correctly the Auto Start feature will function even if it is
configured. To enable the Unisight DVR Web Server check the Enable Local Web Server
check box. The Local Web Server enables client access through Internet Explorer. For the
26
