24 von 72
Stand 24.2.2020
DE
EN
FR
NL
IT
ES
PL
CLEANING AND CARE
Switch off the appliance.
Unplug the plug from the electrical outlet.
Allow the appliance to cool completely.
1. Never use any abrasive scouring agents, steel wool, metal objects, hot
cleaning agents or disinfectants.
2.
You can remove dust in the appliance if you carefully hold a vacuum cleaner
against the air outlet grille or air inlet grille.
3. Store the fan heater in a dry, safe place so that it is protected from dust,
shocks, heat and moisture.
OVERHEATING PROTECTION CIRCUIT
1. The appliance is equipped with an overheating protection circuit that
switches the appliance off when it is heated over 70° C.
2. If the overheating protection circuit has been tripped, switch the appliance
off, unplug the plug from the electrical outlet and let the appliance cool for
at least 30 minutes.
3. Eliminate the cause of the overheating, (e.g. excessive dust in the appliance,
air outlet grille is covered) and start up the appliance again.
4. If after eliminating the cause, you still cannot switch the appliance back
on, or if the overheating protection circuit switches on without an apparent
reason, contact our customer service organisation.
off after pressing the ON / OFF button.
Switch than the main switch on the rear
of the appliance to “0” and unplug the plug from the electrical outlet.
Be aware that the appliance can become very hot – danger of burns!
Particularly ensure that children are kept away from the appliance.
Copyright UNOLD AG | www.unold.de
