P a g e
| 20
Steel Body, Automatic Wood Pellet Feed Hot Water Boiler Operation and Maintenance
Manual
USER MENU DESCRIPTION
Prepurge
I0.1
Gearbox feeding time (0.0-40.0 sec)
I0.2
Gearbox standby time 0.0-2000 sec)
I0.3
Fan speed (600-3000 rpm)
I0.4
Starting time (0-600 sec)
I0.5
Ash gearbox feeding time (0-40 sec)
I0.6
Ash gearbox standby time (0-40 sec)
Starting
I1.1
Gearbox feeding time (0.0-40.0 sec)
I1.2
Gearbox standby time 0.0-2000 sec)
I1.3
Fan speed (600-3000 rpm)
I1.4
Starting time (0-600 sec)
I1.5
Ash gearbox feeding time (0-40 sec)
I1.6
Ash gearbox standby time (0-40 sec)
Ignition 1
I2.1
Gearbox feeding time (0.0-40.0 sec)
I2.2
Gearbox standby time (0.0-2000 sec)
I2.3
Fan speed (600-3000 rpm)
I2.4
Flue temperature (0-100°C)
I2.5
Ignition 1 timing (0-600 sec)
I2.6
Ash gearbox feeding time (0-40 sec)
I2.7
Ash gearbox standby time (0-40 sec)
I2.8
Igniter shutdown temperature (0-
100°C)
Ignition 2
I3.1
Gearbox feeding time (1.0-40.0 sec)
I3.2
Gearbox standby time (0.0-2000 sec)
I3.3
Fan speed (600-3000 rpm)
I3.4
Ignition 2 timing (0-600 sec)
I3.5
Ash gearbox feeding time (0-40 sec)
I3.6
Ash gearbox standby time (0-40 sec)
I3.7
(0)
Igniter on
(1)
Igniter off
j
Power 1
P1.1 Gearbox feeding time (1.0-40.0 sec)
P1.2 Gearbox standby time (0.0-2000 sec)
P1.3 Fan speed (600-3000 rpm)
P1.4 Transition time (0-600 sec)
Power 2
P2.1 Gearbox feeding time (1.0-40.0 sec)
P2.2 Gearbox standby time (0.0-2000 sec)
P2.3 Fan speed (600-3000 rpm)
P2.4 Transition time (0-600 sec)
Power 3
P3.1 Gearbox feeding time (1.0-40.0 sec)
P3.2 Gearbox standby time (0.0-2000 sec)
P3.3 Fan speed (600-3000 rpm)
P3.4 Transition time (0-600 sec)
Power 4
P4.1 Gearbox feeding time (1.0-40.0 sec)
P4.2 Gearbox standby time (0.0-2000 sec)
P4.3 Fan speed (600-3000 rpm)
P4.4 Transition time (0-600 sec)
Power 5
P5.1 Gearbox feeding time (1.0-40.0 sec)
P5.2 Gearbox standby time (0.0-2000 sec)
P5.3 Fan speed (600-3000 rpm)
P5.4 Transition time (0-600 sec)
Power 6
P6.1 Gearbox feeding time (1.0-40.0 sec)
P6.2 Gearbox standby time (0.0-2000 sec)
P6.3 Fan speed (600-3000 rpm)
P6.4 Transition time (0-600 sec)
Common parameters
P7.1 Ash blowing time (0-250 sec)
P7.2 Ash blowing standby time (0-1000
sec)
P7.3 Fan speed (0-3000 rpm)
P7.4 Ash gearbox feeding time (0-40 sec)
P7.5 Ash gearbox standby time (0-40 sec)
P7.6 Transition temperature between
powers (0.5-10.0)
Power 0 (Sleep Mode)
P8.1 Gearbox feeding time (1.0-40.0 sec)
P8.2 Gearbox standby time (0.0-2000 sec)
P8.3 Fan speed (600-3000 rpm)
Closing
S1.1 Fan speed (0-3000 rpm)
S1.2 Closing time (0-20000 sec)
S1.3
(0)
Ash gearbox off
(1)
Ash gearbox on
S1.4 Time to start feeding at closing (0-
20000 sec)
S1.5 Time to feeding at closing (0-50 sec)
