UNIVIEW nvr201-08lp Quick Manual Download Page 1

Manual Version:V1.03 

 

NVR Quick Guide 

Welcome 

Thank  you  for  choosing  our  product.  This  guide  contains  useful 

information  about  using  the  device.  Please  read  through  this  guide 

before you start. 

Notice 

 

All  operations  should  comply  with  your  local  electrical  safety 

codes.  

 

We  (including  our  dealers)  shall  not  be  held  responsible  for  any 

damage  or  loss  caused  by  improper  handling  during  the 

installation or use of the device.  

 

The  illustrations  in  this guide  are  for  reference  only  and  may  be 

different  from  the  actual  device.  This  guide  is  subject  to 

change without notice. 

Packing List 

Please check the items in your package carefully. Contact your dealer if 

you find anything missing or damaged. 

 

Power adapter 

 

Hard disk data cable 

 

Hard disk power cable 

 

Mouse 

 

Screws 

 

User document 

 

Anti-counterfeiting notice 

 

Power cable (for some models only) 

Summary of Contents for nvr201-08lp

Page 1: ...ponsible for any damage or loss caused by improper handling during the installation or use of the device The illustrations in this guide are for reference only and may be different from the actual device This guide is subject to change without notice Packing List Please check the items in your package carefully Contact your dealer if you find anything missing or damaged Power adapter Hard disk dat...

Page 2: ...are only for illustration purpose 1 Loosen the screws on the bottom cover 2 Fix the four screws on the disk without fully tightening them 3 Align holes on the disk with holes on the bottom cover 4 Secure the disk to the bottom cover using four screws 5 Connect the data and power cables 6 Place the cover in position and then fix the four screws ...

Page 3: ...ed to the network Steady blue The device is connected to the cloud server Blinking red The disk is reading or writing data Interfaces The interfaces may vary depending on your device model Local Login After the device starts up use the default username admin and password 123456 to log in for the first time ...

Page 4: ...ontaining at least eight characters is recommended Login from the Web Open a Web browser and enter the IP address of your device in the address bar Follow prompts to install the plug in After the installation is completed reopen the Web browser and log in The default IP address of your device is 192 168 0 30 The default username for your device is admin and password is 123456 ...

Reviews: