25
2.
Click
, select a stream type, and then set the IP address and port number of the unicast or multicast
group for the decoding device that receives audio and video streams from the camera.
3.
To delete a stream, click
.
4.
Click
OK
to complete the operations.
RTSP Multicast Address
After an RTSP multicast address is configured, the third-party player can request the RTSP multicast media
stream from the camera through the RTP protocol.
1.
Click
Setup
>
Video
>
Media Stream
>
RTSP Multicast Address
.
2.
Set the multicast address (224.0.1.0 to 239.255.255.255) and port number (0 to 65535).
3.
Click
Save
.
Common Alarm Configuration
You can schedule alarm reporting and set actions that can be triggered by other devices so that alarms and
the triggered actions can be handled in time.
Alarm reporting can be scheduled for motion detection alarm, alarm input, alarm output, tampering
detection alarm, and audio detection alarm. The supported alarms may vary with device model. For the
alarm types that your camera supports, see the Web interface.
Configuring Motion Detection Alarm
Motion detection detects the object motion in a specified rectangular area during a period. You need to set
a detection area, sensitivity of detection, object size, and history for the camera to decide whether to report
a motion detection alarm when it detects motion.
NOTE!
This function is not supported by some models. Please see the actual model for details.
The alarm triggered actions may vary with models. Please see the actual Web interface for details.
Area Detection
1.
Click
Setup
>
Events
>
Common Alarm
>
Motion Detection
. Set
Detection Mode
to
Area
.
