33
PAIRING
4. Then press the lock button on each remote to
pair them.
5. Remove key from ignition.
6. Test all remotes.
24
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
Use this Procedure for Vehicles with Driver
Information Center Buttons. This information is
in your Owners Manual in the Drivers Information
Center Section.
1. Insert Key and turn to
ON
position so you can
access Driver Information Center.
2. Press the vehicle information button until
PRESS
TO RELEARN REMOTE KEY
displays.
3. Press the set/reset button until
REMOTE KEY
LEARNING ACTIVE
will display.
4. Press and hold the
LOCK
and
UNLOCK
buttons
on the keyless remote at the same time for
approximatley 15 seconds. A chime will sound
indicating that the remote is
PAIRED.
5. To
PAIR
additional remotes at this time repeat
Step #4. This vehicle can have a maximum of
eight remotes paired.
6. To
exit
PAIRING
MODE
turn key off and remove
key.
7. Test all remotes.
Use this Procedure for Vehicles with Driver
Information Center Buttons. To access this
display, the vehicle must be in Park (P) with key
in the on position (as far as you can go without
cranking engine).
1. Press the trip odometer reset stem until
RELEARN REMOTE KEY
displays.
2. Press and hold the trip odometer reset stem for
three seconds.
3. The
message
REMOTE KEY LEARNING
ACTIVE
will display.
4. Press and hold the
LOCK
and
UNLOCK
buttons
RQWKH¿UVWNH\OHVVUHPRWHDWWKHVDPHWLPHIRU
approximately 15 seconds. A chime will sound
indicating that the remote is
PAIRED
.
5. To program additional remotes at this time repeat
Step #4.
6. This vehicle can have a maximum of eight
remotes
PAIRED.
7. To
exit
PAIRING
MODE
turn key off and remove
key.
8. Test all remotes.
