background image

27

CONTRACT AND LIMITED WARRANTY

 

UFS50

 FLOOR SCAPER 

CONTACT:

Universal Flooring Solutions

, INC. will guarantee every machine they build, to be free from defects in 

material and workmanship for (1) one year from date of purchase. The obligation of 

Universal 

Flooring Solutions

, INC. under this warranty is limited to the repair or replacement of any parts which, 

under normal use, prove to be defective in material or workmanship. The parts involved or the unit in 
question should be returned to 

Universal Flooring Solutions

, INC. or to a point designated by us, 

transportation prepaid.

This warranty does not obligate us to bear the cost of labor or transportation charges in connection 
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been 
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has 
been repaired or altered outside our factory.

This warranty does NOT obligate 

Universal Flooring Solutions

, INC., with respect to items not of our 

manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and 
warranties.

We shall in no event be liable for consequential damages or contingent liabilities arising out of failure 
of any equipment or parts to operate properly.

© COPYRIGHT 2015, 

Universal Flooring Solutions

, INC. ALL RIGHTS RESERVED.

The 

Universal Flooring Solutions

 logo is a registered trademark of 

Universal Flooring Solutions

, Inc. 

and may not be used, reproduced, or altered without written permission. All other trademarks are the 
property of their re-spective owners and used with permission.

Universal Flooring Solutions

 may have patents, patent applications, trade marks, copyrights of other 

intellectual property right covering this product in this document.

This manual MUST accompany the equipment at all times. This manual is considered a permanent 
part of the equipment and should remain with the unit if resold.

The information and specifications included in this publication were in effect at the time of approval for 

printing. 

Please contact 

Intafloors Trade Depot

 Customer Service Department with any questions you 

might have regarding distributors, parts or service.

Telephone: 

+61 (02) 8678 5479

Fax: 

+61 (02) 8678 5483

E-mail: 

[email protected]

Customer Service Hours: Monday through Friday, 

6:30am - 4:30pm GMT+10

Intafloors Trade Depot Head Office

15 Artisan Road 

Seven Hills NSW 2147

Universal Flooring Solutions

, INC. LIMITED WARRANTY

Summary of Contents for UFS50





























Reviews: