1
Model OPG-K5/K250
Oracle
(TM)
Futura Pro 900 Remote
Universal Wireless Solutions
Compatibility:
•
Compatible with
Oracle GCU (Gate Controller
Unit)/DFGCU (Dual Frequency Gate Controller
Unit)
, up to 4 units
•
Compatible with Oracle
•
Oracle Gate Controller Unit
(GCU) /
Dual Frequency
Gate Controller Unit
(DFGCU)
. Can be used alone (up
to 4 GCU/DFGCU’s) or in combination with Oracle
GAP and other Access Control and Communication
products.
Model FPRORMT
6/14/2007
Patents Pending
Thank you for purchasing the
Oracle Futura Pro 900 Remote.
This product has been designed
and manufactured in the USA,
utilizing the highest quality
standards available.
Features:
•
For: Gates, Garage Doors, Security Systems, Lighting and anything Electric!
•
4 Button, Multi Channel design, can control 4 devices
•
Lithium Battery Lasts for Years and will not be effected by high vehicle temperatures and humidity
•
Over 1000 Feet Of Range through multiple channels, chosen automatically
•
Visual Indication Of Command Receipt, as well as indication of failure
•
Automatic Retry of Command on Multiple Radio Channels
•
125 Channel, Digital, Ultra-Secure, 900 MHz
•
Built-in Unique ID as well as "Learning" of Network ID. WEIGAND compatible
•
All functions Performed automatically by Built-in Microprocessor
Setup Instructions
1: Setting up the Futura Pro Remote:
•
Will the Futura Pro Remote (FPRORMT) be used with an ULTRX900-R Unit in Receiver Mode?
No: Go to Step 2.
Yes:
Place the Ultra RX 900 Unit in Learn Mode by disconnecting the power and waiting at
least 5 seconds before reapplying power.
- Within 15 seconds, press the large button on the remote.
- The Ultra RX 900 Unit will buzz indicating success.
- Proceed to
Step 5
.
2: Setting up the Futura Pro Remote:
•
Will the Futura Pro Remote be used with a Gate Access Panel (GAP) or Keypad (OWK) that
includes a GCU or ULTRX900-R as the gate activator?
No: Go to Step 3.
Yes:
The Futura Pro Remote needs to be taught directly to the Active Unit (GAP or
OWK). To put the Futura Pro Remote in Learn Mode, press the
large
button, button
2
and
button
4
at the same time, for
1 second
and
release
.
- On the GAP or Keypad Unit, enter in the
Master Pin Number
, followed by
05
.
- The remote led will blink 3 times slowly, indicating success.
- Proceed to
Step 6
.
