Universal Tool UT8818 Operator Instructions Download Page 4

Page: 4 / 4

Distributor

Notes

Page No 4

Accessories

Declaration of Conformity

Universal Air Tool Company Limited

Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England

declare under our sole responsibility that the product

Model UT8818 1/2” Capacity Reversible Pistol Grip Drill, Serial No

to which this declaration relates is in conformity with the following standard(s) or other normative document(s)

EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Part 1, Pneurop PN8NTC1

following the provisions of

89/392/EEC as amended by 91/368/EEC & 93/44/EEC

Place and date of issue

Name and signature or equivalent marking of authorised person

Lane End

D.H.Moppett (Man Director)

This document may not be copied wholly or in part by anyone without the consent of the Directors of Universal Air Tool Company Limited

Designed & Written in the U.K.

ARTHUR PATERSON

Summary of Contents for UT8818

Page 1: ...n Figure 1 as this will supply clean lubricated air at the correct pressure to the tool Details of such equipment can be obtained from your supplier If such equipment is not used then the tool should...

Page 2: ...and 25 Make sure that the faces of end plates 24 and 19 that about cylinder 20 are flat and free from burrs The height of the rotor 22 must be lower than the height of the cylinder 20 otherwise the mo...

Page 3: ...h Black 19 7S5001 Ball Bearing 20 1S6001 A End Plate 21 1P6005 Cylinder 22 2S2023 Key 23 1S6047 10T Rotor Ref No Part No Description 23 1P6051 Blade 6 24 1P6063 Front Plate 25 7S2011 Ball Bearing 26 6...

Page 4: ...tandard s or other normative document s EN792 Draft EN292 Parts 1 2 ISO 8662 Part 1 Pneurop PN8NTC1 following the provisions of 89 392 EEC as amended by 91 368 EEC 93 44 EEC Place and date of issue Na...