MODEL: UT360H-60-6 / UT360H-60-6G
UT360H-60-8 / UT378H-78-6
3HP Horizontal Grinders
Universal Tool
™
Page 1: ...MODEL UT360H 60 6 UT360H 60 6G UT360H 60 8 UT378H 78 6 3HP Horizontal Grinders Universal Tool ...
Page 2: ...ached 4 Do not operate this tool if it does not contain a legible warning label 5 Do not continue to use a tool or hose that leaks air or does not function properly 6 Never direct a jet of compressed air toward people or animals 7 Protect your lungs Wear a face or dust mask if the operation is dusty WARNING Some dust created by power sanding sawing grinding drilling and other construction activiti...
Page 3: ...550 78 7800 RPM GOVERNOR ASSEMBLY 1 18 7064 360HL 01 BEARING SPACER 1 4 700 9 BALL BEARING 1 19 650 H 14 SEAL 1 5 360 3 REAR END PLATE 1 20 650 H 13 BEARING CAP 1 6 360 2M CYLINDER 1 21A 700 5 6 STANDARD REAR FLANGE 1 7 2125 0750 PIN SPRING 1 8IN DIA X 3 4IN LG 2 21B 540620 8 STANDARD REAR FLANGE 1 8 360 5A ROTOR ASSEMBLY 1 22A 700 4 6 STANDARD FRONT FLANGE 1 9 360 4 REAR SPACER 1 22B 540619 8 STA...
Page 4: ...the original warranty period Universal Tool s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective tool There are no other warranties expressed or implied and Universal Tool shall not be liable for incidental consequential or special damages or any other damages costs or expenses excepting only the cost or expense of repair or replacemen...
