Universal Devices Z-Matter, Assembly Instructions

Page: 1 / 3

Assembly Instructions for Z-Matter
Installing ZMatter into your Polisy is pretty straight forward.
Preparations :
1. If your Polisy has been collecting dust for more than a year, the first thing you
need to do is to freshen it up. Here’s how you do it . Once done, you can access
your Polisy just like you did your ISY994. Here’s how to do so .
2. If you have not already migrated your ISY994 to Polisy, that’s the first thing you
need to do. Migration is easy and you can even use your existing PLM for
INSTEON/X10 communications. Here are
the instructions .
3. You will be sent further instructions for the required IoX version and how-tos for
untapping our additional features and enhancements by 12/01/2022.
Installation Instructions :
1. Unplug Polisy from power
2. Take off the top panel by unscrewing the 4 screws on the sides (2 on each side)
3. Connect the SMA side of the antenna wires into the two holes on each side of the
top panel