Universal Devices ISY-994i Series, User Manual

Page: 624 / 692

Page | 601
23.5.12 FR – Factory Reset
To reset the ISY to factory settings, type FR at the shell prompt. Note: By performing a
factory reset, the following information shall be lost (irrecoverable) and the Username and
Password shall revert back to admin/admin.
•
All the schedules
•
All the notifications settings
•
All the alarm settings
•
Time zone
•
All the discovered devices, their names, their groups
• The network name
23.5.13 FS – Format SD Card
To format the SD Card, type FS at the shell prompt. Answer the "Are you sure question"
with an upper case "Y"
Please note: the ISY works with both FAT 16/32, but FS function formats it specifically for
use with ISY with some performance improvements so its preferred you use this method.
23.5.14 LS – List All Files & Directories
To view the listing of files and directories on the memory card, type LS at the shell prompt.
23.5.15 MN – Menu
To show the menu, type MN on the shell prompt. You may also enter any unrecognized
command to get the menu to be shown.
23.5.16 RL – Reset Login Credentials
To reset the login credentials back to the initial state of admin/admin, type RL at the shell
prompt.
Note: If you have forgotten your Username and Password and are thus unable to login to
the shell, please see this page: Resetting Your Userid/Password
23.5.17 RS – Reboot the System
To reboot the system, type RS on the shell prompt.