Universal Devices ISY-994i Series, User Manual

Page: 139 / 692

Page | 116
7.6.7 Adding Devices to a Scene
Devices may be added to a scene one at a time, or an entire group of devices may be added
at once. To add a device or group of devices to a scene:
•
Select the devices to be added:
o
In the tree view of the Main tab, click on the device to be added, or hold down
the <Control> key and click one at a time on a group of devices to be added
and then release the <Control> key. You may click on device names anywhere
they appear within the tree, such as under My Lighting or under other
scenes. To select a contiguous group of devices, click on the first device of the
group, press and hold the <Shift> key, click on the last device of the group,
and release the <Shift> key. In this case, the devices must all be within the
same branch of the tree, such as My Lighting or another scene.
•
Add the devices to the scene in either of the following ways:
o
Drag the selected devices onto the scene name in the tree, or
o
Right-click and from the context menu choose Add to Scene .... A Choose
Scene window will open, allowing you to select the desired scene.
•
Set the devices as controllers or responders:
o
A Confirm Add window will open, listing the devices to be added to the scene.
For each device in the list, select the device and choose whether it should be
added to the scene as a controller or a responder. The default is responder
for all devices except those which are controller-only devices. When all
devices are correctly set, click the OK button and the devices will be added to
the scene.
o
Note : If none of the devices being added are capable of acting as both
controller and responder (each device being added is either a responder-only
or a controller-only device), then clicking the OK button will not be required;
the devices will be added automatically.
7.6.8 Removing a Device from a Scene
In the tree view of the Main tab, right-click on the device within the scene, and from the
context menu choose Remove from Scene. The device is removed from the scene
immediately;
no confirmation window is displayed.