manualshive.com logo in svg

Universal Audio Arrow, Manual

Share
Download
Universal Audio Arrow Manual Download Page 28

Arrow Manual

Hardware Controls & Connectors 

28

Top Panel

Refer to the illustration below for descriptions in this section. 

Top panel elements

(1) LEVEL Knob & Switch

The LEVEL knob & switch controls multiple functions. The knob’s current function is 
selected with the MONITOR (3) and PREAMP (4) buttons.

Monitor Mode
When in 

MONITOR Mode

 (3), rotate clockwise to increase the monitor output level or 

headphone output level, depending on which output (10 or 12) is selected with the 
MONITOR (3) button.
When MONITOR (10) is selected in monitor mode, press to mute/unmute the monitor 
outputs. 

Note: MUTE does not apply to the headphone output.

Preamp Mode
When in 

PREAMP Mode

 (4), rotate the knob clockwise to increase the amount of preamp 

gain for the currently selected input channel.

Tip: When in preamp mode, press to toggle between selection of channels 1 & 2.

Unison Integration

The LEVEL knob can be used to control Unison-enabled UAD preamp 
plug-ins. See the 

Unison 

chapter for complete details. 

6

1

3

2

5

4

Summary of Contents for Arrow

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands