manualshive.com logo in svg

Universal Audio Arrow, Manual

Share
Download
Universal Audio Arrow Manual Download Page 230

Arrow Manual

UA Account & Store 

230

UAD Authorization Procedure

UAD plug-ins are automatically authorized each time the computer is started. However, 
the UAD system must be manually authorized whenever a plug-in is purchased from the 
UA store.

Note: Follow this procedure to manually authorize a new UAD plug-in purchase 
whenever you buy a plug-in at the UA store.

To manually authorize UAD plug-ins to run on the UAD device:

1.  Open the UAD Meter & Control Panel application (see 

Launching the Application

 

for methods).

2.  Access the 

Plug-Ins Panel

 within the application by clicking the blue “UAD-2” 

button in the UAD Meter window. 

Click

Click

 

3.  Click the “Authorize Plug-Ins” button in the Plug-Ins panel. 

Click

Click

 

4.  After a few moments the Authorization Status window appears. Click OK to close 

the window. 

UAD plug-ins are now authorized and ready for use.

Summary of Contents for Arrow

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands