47
Version 1.0
© UNIVERS
English
Menus and OSD
6
RF System
In the case that you have combined your TV or video device through an antenna cable
with the receiver, please indicate which TV system employ your device.
Selection: M, B/G, I, D/K .
As in the previous example, for Great Britain you will usually select:
PAL B/G
Change with the
VOL
buttons.
Time Zone
The receiver needs to know the precise time for the EPG (
E
lectronic
P
rogram
G
uide).
That is the reason why you are required to select the time zone corresponding to your
area.
The time zones displayed by the receiver correspond to the Greenwich time.
For Spain, for example: Summer time = GMT + 02
Winter
time
=
GMT
+
01
Please take this in consideration, and always remember to adapt the time values to the
season’s changes in winter and summer time. Change with the
VOL
press buttons.
Remote Control Switch
In order to avoid interferences among
different remote controls, you have the
possibility to change the code line.
Change it with the
VOL
buttons.
Remember to change the switch in the
remote control’s battery chamber as well.
Remote Control’s Switch
If you change the remote control’s code only in the menu,
a security message will appear when you leave the menu.
Scart Output
In order to get an optimal quality picture in your television set, please use the RGB option,
if your television set supports it.
This option means that the colours’ information is transmitted into separate components
to the TV set, unlike in the CVBS option.
Select between the CVBS or RGB options by pressing the
VOL
buttons.
