P
P
P
Product
roduct
roduct
roduct M
M
M
Manual
anual
anual
anual
NO. :J
G19-C0020
REV
：
R1.0
DATE
：
2019-3-23
Security rating：□Top secret□ Confidential □Secret□ Ordinary
In case the battery terminals are dirty or oxidation, clean the terminals with a dry cloth before use.
Otherwise poor performance may occur due to the poor connection with the instrument.
Tape the discarded battery terminals to insulate them.
The lithium ion battery charge discharge shallow is beneficial to improve the cycle life, proposal user
each discharge is put to the nominal capacity of 80%.
Do not combine the battery pack more than 4 in series and 8 in parallel.
7.
7.
7.
7. Installation guide
Installation guide
Installation guide
Installation guide
7777.1 Battery checking
.1 Battery checking
.1 Battery checking
.1 Battery checking
(1)After receiving the battery, you should first check the packing carefully. During the handling process, please
ensure there’ s no shock on the battery.
(2)Please check the battery case and accessories if there’ s any damage or leakage, if so, please contact us
immediately.
(3)Please check the output connector is correct or not, measuring the positive and negative voltage and the
voltage, if it’ s within the normal standard.
7777.2 Precautions
.2 Precautions
.2 Precautions
.2 Precautions
(1)No smoking or fire during installation to avoid short-circuit of battery and prevent equipment damage or
personal injury.
(2)The battery should be installed under a condition with well-ventilated and no sunlight. Don’ t put it under
place with possible flooding.
(3)When fastening battery terminals, please don’ t use excessive force, or the terminals could be damaged.
(4)Use a dry cloth to clean the battery package, please don’ t use oil or other volatile organic solvents to clean
the battery case, or it may damage it.
(5)Please make sure the po） & negative（-） polarity is correct connected, or it may cause fire or damage
the battery or the equipment.
7777.3 Battery Installation
.3 Battery Installation
.3 Battery Installation
.3 Battery Installation
(1)Clean up the position of battery mounting, make sure there’ s no dust or mental objects or others.
(2)Put the battery in right place
(3)Make good connection of terminals between the equipment and battery.
(4)After the connection, please check if it’ s well connected, positive and negative is reversed, if there’ s dust
or debris.
(5)Start testing the equipment if it could be well working with battery.
(6)Finished.
8888.Battery care and maintenance
.Battery care and maintenance
.Battery care and maintenance
.Battery care and maintenance
8888.1
.1
.1
.1 When the battery is low, please charge in time. This could ensure longer cycle life. If the battery can’ t be
