10
© 2022 United States Stove Company
VENTING YOUR PELLET STOVE INTO AN
EXISTING CLASS A 6” CHIMNEY SYSTEM
1.
IMPORTANT:
If you are installing your pellet stove as a replacement
to an existing wood stove, you can install your pellet
stove using the existing class A 6” venting system.
You must have the existing chimney system cleaned
and/ or inspected by a qualified chimney sweep
before proceeding with the installation of your pellet
stove.
2. To the right is an example of an installation using part
number 860001, 3-6” transition into 6” connector
pipe. the illustration is only an example. Please
conform to any local building codes or regulations
having jurisdiction before you have a qualified
installer proceed with this installation.
Existing Class ‘A’
6” Chimney System
3” PL Vent
Clean Out Tee
Support
Bracket
Ceiling
Support
3” to 6” Pipe
Adapter
INSTALLATION
