background image

227 Industrial Park Road • P.O. Box 151 • South Pittsburg, TN 37380 • (423) 837-2100

UNITED STATES STOVE COMPANY

Propane (LPG) Model

C9830L

Natural Gas Model

C9830N

851257A    11/97

WARNINGS

WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.

THIS APPLIANCE MAY BE INSTALLED IN
AN AFTERMARKET* MANUFACTURED
(MOBILE) HOME, WHERE NOT
PROHIBITED BY STATE OR LOCAL
CODES.

*Aftermarket:  Completion of sale, not

for purpose of resale, from the
manufacturer.

THIS APPLIANCE IS ONLY FOR USE WITH
THE TYPE OF GAS INDICATED ON THE
RATING PLATE.  THIS APPLIANCE IS NOT
CONVERTIBLE FOR USE WITH OTHER
GASES.

This is an unvented gas-fired heater.  It uses
air (oxygen) from the room in which it is installed.
Provisions for adequate combustion and
ventilation air must be provided.  Refer to
"Adequate Combustion And Ventilation Air"
on page 6 of this manual.

WARNING: Do not use a blower insert, heat
exchanger insert or other accessory not approved
for use with this heater.

VENT-FREE PEDESTAL GAS HEATER

 INSTALLATION AND OPERATION INSTRUCTIONS

Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone
in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.

Installation and service must be performed by a qualified
installer, service agency or the gas supplier.

Summary of Contents for CAVALIER C9830L

























Reviews: