background image

852070M-0503j

MODEL: AP5660PE

United States Stove Company

227 Industrial Park Rd.,

South Pittsburg, TN 37380

PH: (800) 750-2723

www.usstove.com

•  Please read this entire manual before installation and use of 

this appliance. Failure to follow these instructions could result 

in property damage, bodily injury, or even death.

• 

Contact your local building or fire officials about obtaining 

permits, restrictions and installation inspection requirements in 

your area.

•  SAVE THESE INSTRUCTIONS.

• 

If your heater is not properly installed, a house fire may result. 

For everyone’s safety, follow all Installation and Operating 

Directions. Never use makeshift compromises during the 

installation of this appliance. Contact your local building 

or fire officials about restrictions and installation inspection 

requirements in your area. These Pellet Stove Room Heaters 

have been designed for use in the US and Canada and are 

suitable for mobile homes.

This manual is subject to change without notice.

ALL PICTURES SHOWN ARE FOR ILLUSTRATIVE PURPOSES ONLY. 

ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENT.

This unit is not intended to be used as a 

primary source of heat. 

Certified to ASTM E1509-12 ( 2017)

and Certified to ULC S627, 2000

U.S. Environmental Protection Agency 

Certified to comply with 2020 

particulate emissions standards.

SAVE THESE INSTRUCTIONS

THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU 

TO ORDER REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

CALIFORNIA PROPOSITION 65 WARNING:

This product can expose you to chemicals including carbon monoxide, which 

is known to the State of California to cause cancer, birth defects and/or other 

reproductive harm. For more information, go to www.P65warnings.ca.gov

Ce produit peut vous exposer à des agents chimiques, y compris au monoxyde de 

carbone, lesquels sont reconnus dans l’État de la Californie comme causant le cancer et 

des malformations congénitales ou autres dommages au fœtus. Pour obtenir plus de 

renseignements, veuillez consulter le site www.P65warnings.ca.gov

R

Report #: F19-548

Summary of Contents for Ashley AP5660PE

























































Reviews: