United Process Controls PROTHERM 50, Operating Manual

Page: 7 / 28

UNITED PROCESS CONTROLS GMBH Page 6 Protherm 50 P68.230
Structure of the menus
In accordance with the big function-variety of the PT50, there are many parameters for the adaptation of
the controller to the tasks. To facilitate the survey the parameters of the same functions are merged in
sub menus.
Which submenus are available in each of the main menus can be selected with help of the service-
program on the PC. Therefore it is not possible to describe here a main menu layout, but the table be-
low shows all available sub menus.
Following sub menus can be included in the main menus:
Menu Function Font
Overview Actual values of atmosphere- and temperature controller large
Atm-Overview Actual value and setpoint of the atmosphere controller large
Tmp-Overview Actual value and setpoint of the temperature controller large
Sensor-values actual value of e.m.f. and temperature of the O2-probe large
Actual values Display of all calculated values normal
Probe-purging Configuration the probe-purging normal
Atm-controller Configuration of the atmosphere-controller normal
Tmp-controller Configuration of the temperature controller normal
Measurement input Configuration of the measurement inputs normal
Process values Configuration of the process values CO and H2 normal
Foil Input of a foil-value with automatic calculation of the KF normal
Correction Input of the correction-factors and Offsets normal
CAN-Bus Configuration of the CAN-Interface normal
MODBUS Configuration of the optional MODBUS-Interface normal
PROFIBUS Configuration the optional PROFIBUS DP-Interface normal
Warning-status Display of the current warnings normal
Alarm-status Display of the current alarms normal
Warning-config. Configuration the warning-function normal
Alarm-configuration Configuration the alarm-function normal
Ext. Analog-inputs Configuration of the external analog inputs * normal
Analog-output 1 Configuration of the external analog output (channel 1) * normal
Analog-output 2 Configuration of the external analog output (channel 2) * normal
Analog-output 3 Configuration of the external analog output (channel 3) * normal
Analog-output 4 Configuration of the external analog output (channel 4) * normal
Limit 1 Configuration limit 1 normal
Limit 2 Configuration limit 2 normal
Limit 3 Configuration limit 3 normal
Limit 4 Configuration limit 4 normal
Access-control Configuration of the access to the user levels normal
Options different settings and password setting normal
O2-values Display O2 in % and as LogO2 large
Offsets Input of the offsets for US,, TCS, O2% and LogO2 normal
That with * marked functions requires additional CANopen-compatible I/O-Module, which are connect-
ed via CAN-Bus with PT50.