DNx-MUX-414 / DNR-MUX-418 1x3 Multiplexer Board
Appendix A
26
May 2019
www.ueidaq.com
508.921.4600
© Copyright 2019
United Electronic Industries, Inc.
Appendix A
A. Accessories
The following cables and STP boards are available for the MUX-414 / MUX-418
board.
DNA-CBL-62
This is a 62-conductor round shielded cable with 62-pin male D-sub connectors
on both ends. It is made with round, heavy-shielded cable; 2.5 ft (75 cm) long,
weight of 9.49 ounces or 269 grams; up to 10ft (305cm) and 20ft (610cm).
DNA-STP-62
The STP-62 is a Screw Terminal Panel with three 20-position terminal blocks
(JT1, JT2, and JT3) plus one 3-position terminal block (J2). The dimensions of
the STP-62 board are 4w x 3.8d x1.2h inch or 10.2 x 9.7 x 3 cm (with standoffs).
The weight of the STP-62 board is 3.89 ounces or 110 grams.
Figure A-1. Pinout and Photo of DNA-STP-62 Screw Terminal Panel
62 to J2
42 to J2
21 to J2
61 to JT1
41 to JT1
20 to JT1
60 to JT1
40 to JT1
19 to JT1
59 to JT1
39 to JT1
18 to JT1
58 to JT1
38 to JT1
17 to JT1
57 to JT1
37 to JT1
16 to JT1
56 to JT1
36 to JT1
15 to JT1
55 to JT2
35 to JT1
14 to JT1
54 to JT2
34 to JT2
13 to JT2
53 to JT2
33 to JT2
12 to JT2
52 to JT2
32 to JT2
11 to JT2
51 to JT2
31 to JT2
10 to JT2
50 to JT2
30 to JT2
9 to JT2
49 to JT2
29 to JT2
8 to JT2
48 to JT3
28 to JT3
7 to JT2
47 to JT3
27 to JT3
6 to JT3
46 to JT3
26 to JT3
5 to JT3
45 to JT3
25 to JT3
4 to JT3
44 to JT3
24 to JT3
3 to JT3
43 to JT3
23 to JT3
2 to JT3
22 to JT3
1
to JT3
SHIELD
DB-62 (female)
62-pin connector
:
to
J2
to
JT1
to
JT2
to
JT3
