Version 1.0
608286G
Charging the Scanner
*
:
Default Option
BT Keyboard *
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.
Bluetooth
BT/BLE Un-Pair / Pair
Enable Cradle Auto Pair *
System Reset & Info
Remark:
If ‘Higher Level RF Signal Checking’ is selected, BLE communication will become more reliable but the distance will be shorter.
Scanner type
How to turn on / turn off the scanner
Turn on : Long press the trigger key for 2 seconds
until you hear a long beep sound.
Turn off : Long press the trigger key for about 7 seconds
until you hear a short beep sound.
Before using the scanner for the first time,
please charge the scanner with the cradle.
Red LED light : Being charged
LED light goes off : Fully charged
BLE Keyboard
BT SPP
Auto*
Operation Mode
Wedge
Batch
Higher Level RF Signal Checking
Normal Level RF Signal Checking *
Disable Cradle Auto Pair
Data & Memory
Send Batch
Note: To erase buffer, scan ‘Enter Auto Buffer Erase’ and then scan ‘Erase’.
To erase batch file, scan ‘Enter Batch File’ and then scan ‘Erase’.
Free Buffer / Drive Space
Enter Auto Buffer Erase
Erase
Enter Batch File Erase
Erase Last Data Entry
How to pair the scanner with the cradle
Scan Mode
Manual Trigger-Normal*
Presentation Mode
Aimer Mode*
Off
Aimer Mode
Mobile Phone Read Mode
Hand Held Scanning - Mobile Phone
Streaming Presentation - Mobile Phone
Pairing barcode label
■
These settings are for cradleless mode only when the scanner connects to the host directly not
through cradle.
■
To switch the different scanner type,please do un-pair first and then select the scanner type and
redo Bluetooth connection.
1. Firstly, select the interface you want to communicate with
your PC, for USB/RS232 cable connection, please switch
the interface switch to the left/right side as below figure and
then connect the cradle and the PC via the interface cable.
2. Long press trigger key for 2 seconds to turn on the scanner.
And then put the scanner on the cradle to start the
BT pairing automatically.
3. When the pairing is completed, both the scanner LED and
the cradle LED will show solid blue light.
Factory Default
Send Info
Reset Setting
(Reset setting and
Clean
Bluetooth Link-key information)
(Reset setting but
Keep
Bluetooth Link-key information)
Bluetooth 2D Barcode Scanner
Quick Start Guide