Unitech HT682 User Manual Download Page 37 | Manualshive

Page: 37 / 63

Unitech HT682 User Manual Download Page 37

25

Before beginning installation, carefully read the following:

Because you will be restarting your computer during installation, save your work and quit all

programs before you begin.

To set up your communication settings, the HT682 serial cable is required to connect the

HT682 to your host computer.

If you run the Windows NT® operating system with a service pack, you will be informed

during setup that you may need to reinstall the service pack. Try connecting first, and if
unsuccessful, reinstall the latest service pack.

Requirements

To synchronize, ActiveSync version 3.7 or higher must be installed on both your desktop
computer and the HT682 PDA Scanner. The HT682 PDA Scanner is installed with ActiveSync
and shipped. Therefore, you must install ActiveSync 3.7 on your desktop computer.
To install ActiveSync on your desktop computer, please link to Microsoft website to get free
download driver.

Installation

Follow the installation procedure below to install Microsoft ActiveSync, connect your HT682 to
your desktop computer, and establish a partnership for synchronization, if required.

In order to exchange data between your computer and the HT682, Microsoft ActiveSync must
be installed on your computer. Use A USB cable that comes with your device or the docking
station to connect the device to your computer.

NOTE:

If you have a previous version of the Microsoft ActiveSync installed in your computer,

uninstall it first before installing the latest version of Microsoft ActiveSync.

To install Microsoft ActiveSync on your computer:
1. Close any open programs, including those that run at startup, and disable any

virus-scanning software.

2. Download the ActiveSync software from the Microsoft ActiveSync Download page at

http://www.microsoft.com/downloads/details.aspx?Fami-lyID=7269173a-28bf-4cac-a682-5
8d3233efb4c&DisplayLang=en

.

3. Browse to the location of the downloaded file, and double-click it. The installation wizard

begins.

4. Follow the instructions on the screen to install Microsoft ActiveSync.

«
...
35
36
37
38
39
...
»

Summary of Contents for HT682
































































Reviews:

No comments