Unitec Wash Select II Operation Manual Download Page 57 | Manualshive

Page: 57 / 214

Unitec Wash Select II Operation Manual Download Page 57

W A S H S E L E C T I I

Document Number:

WS21002

43

Document Title:

WSII Operations Manual

2.6.4

Set Greeting Repeat Delay

Using this feature, you will set the greeting message repeat delay. This is the amount of time
that the Wash Select II will wait before repeating the message if the customer has not
responded by selecting a wash, entering cash or swiping a credit card. The greeting repeat
delay may be set between 0 and 60 seconds. This default setting is 20 seconds. Follow the
steps below to set the greeting repeat delay time.

1.

Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)

2.

Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the “Speech” option is displayed. Press the (*) key to enter.

3.

Scroll through this menu until the “Repeat Delay” option is displayed, then press
the (*) key to enter.

4.

Enter the amount of time you wish the Wash Select II to wait before repeating the
message, and then press the (*) key.

2.6.5

Printing Message List

Using this command, you can print a list of speech messages. The list will show the message
number, message name and the length of the message. To print the message list, follow the
steps below.

1.

Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)

2.

Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the “Speech” option is displayed. Press the (*) key to enter.

3.

Scroll through this menu until the “Print Msg List” option is displayed, then press
the (*) key to enter. The message list will begin to print.

2.6.6

Viewing Current Message List

If you do not have the optional thermal printer, you may view the message list using this
function. The list will show the message number, name and the length of the message.
Follow the steps below to view the current message list.

1.

Using the toggle switch at the top of the CPU board, place the Wash Select II in
setup mode by moving the switch toward the back of the Wash Select II case.
(The CPU board is located on the inside right wall of the Wash Select II case.)

2.

Using the (3) key to scroll forward and the (1) key to scroll back, scroll through the
main menu until the “Speech” option is displayed. Press the (*) key to enter.

3.

Scroll through this menu un

til the “View Msg List” option is displayed, then press

the (*) key to enter.

4.

You will need to use the (3) button to scroll forward to view the next message and
the (1) key to return to the previous one.

«
...
55
56
57
58
59
...
»

Summary of Contents for Wash Select II























































































































































































































Reviews:

No comments