Unitec SSA-001, Manual

Page: 30 / 46

30
（
3
）
Set-up of both right and left positions of paper
Move both left and right paper guide plates to suit the paper size
and the 2 triangle marks on the paper feeding tray aligned with
the center of the card cutting place in the first line. Use the
micro-adjusting nut on the paper guide plate to adjust the paper
tightness.
（
4
）
Paper feeding and cutting
Do not let your hand or hairs close to the first
paper feeding stick at paper feeding and cutting
so as to avoid injury.
Do not take anything out with your finger at
paper feeding and cutting.
①
After setting the paper mode, press <start> key and cutting
upon the set size will be started. The machine will
automatically stop at the end of cutting and stay at the
standby state. Press the key again to start another cutting.
②
At the end of cutting, the whole flow finishes. Please turn off
the power.
2-7 Way to load and unload the rotary blade assembly
2-7-1 Please follow the flow below when to unload the assembly
Make sure of the power to be cut off so as to avoid
electric shock.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn